Crossfire Coils for the Garrett Scorpion Gold Stinger: Compatible Options & Availability

ByThe Answerlode Editorial Team

Crossfire Coil Compatibility for the Scorpion Gold Stinger

The Garrett Scorpion Gold Stinger works exclusively with Garrett’s Crossfire DD searchcoils. The detector ships with a 5″x10″ Crossfire DD coil as standard, which is designed for gold prospecting in varied terrain and offers a solid balance of depth and scanning width.

Available Crossfire Coil Options

Garrett manufactured five Crossfire coils for the Scorpion Gold Stinger, consisting of both elliptical and concentric designs. The two most common and practically useful options are:

  • 5″x10″ Crossfire DD Coil — The standard and most popular choice. This elliptical design delivers excellent depth with good coverage, making it the go-to for general gold prospecting and detection in rocky or mineralized ground.
  • 3″x7″ Crossfire DD Coil — A smaller option useful for working tight spaces, shallow areas, or fine-tuning your search in areas you’ve already covered with the larger coil.

The larger coils in the Crossfire line (going up to 12.5 inches) were also manufactured for the Scorpion, though they are rarely seen in circulation today.

Gold Hunter A3B Compatibility

One useful detail: the Scorpion Gold Stinger shares identical coil compatibility with Garrett’s Gold Hunter A3B detector. This means if you come across A3B coils from online sellers or used equipment listings, they will work on your Scorpion. This connection can expand your options when hunting for replacement or alternative coils.

Finding Coils for a Discontinued Detector

The Scorpion Gold Stinger was discontinued by Garrett and is no longer manufactured or listed in current product catalogs. As a result, original Crossfire coils for this model are difficult to find. Your best options include:

  • Used equipment marketplaces and online auctions, where older detector accessories occasionally surface
  • Specialty metal detecting retailers that stock vintage or out-of-production parts
  • Gold prospecting forums and local detecting clubs, where members sometimes buy, sell, or trade old equipment
  • A3B coil listings, since compatibility allows these to work on your detector

Why Coil Compatibility Matters

Not all metal detector coils are interchangeable. Compatibility depends on three factors: the physical connector type, the operating frequency of the coil, and any proprietary communication protocol your detector uses. Attempting to force an incompatible coil onto your detector can damage the electronics and void your warranty.

Before purchasing any coil online, verify the part number and confirm it’s specifically listed as compatible with the Scorpion Gold Stinger. If you encounter a coil listed only for the A3B, you can safely use it on your Scorpion given their shared design, but avoid coils from other Garrett detector lines unless documentation explicitly confirms compatibility.

Practical Considerations

The 5″x10″ coil that came stock with your detector remains the most versatile option for general prospecting. Unless you have a specific reason to switch (such as working in very tight spaces or shallow targets), keeping and maintaining your original coil is practical. If you do locate a 3″x7″ as a secondary option, it’s worth acquiring since it fills a niche that the larger coil cannot.

When shopping, focus on part numbers 2219400 (5″x10″) and 2219300 (3″x7″), and be prepared to pay a premium for genuine Garrett parts on the secondhand market. Patience in searching forums and community sites often yields better pricing than specialized retail channels.

Sources


Similar Posts